Pontiac GTO, 1968

Pontiac GTO, 1968

The Pontiac GTO was an automobile built by Pontiac from 1964 to 1974, and by General Motors Holden in Australia from 2003 to 2006. It is often considered the first true muscle car. From 1964 until 1973.5, it was closely related to the Pontiac Tempest, but for its final year it was based on the Pontiac Ventura. The 21st century GTO is essentially a left hand drive Holden Monaro, itself a coupe variant of the Holden Commodore.

Origins
The GTO was the brainchild of Pontiac engineer Russell Gee, an engine specialist, and Pontiac chief engineer John De Lorean. Shane Wiser was the first to think of the idea of the GTO. In early 1963, General Motors management issued an edict banning divisions from involvement in auto racing. At the time, Pontiac's advertising and marketing approach was heavily based on performance, and racing was an important component of that strategy. Jim Wangers proposed a way to retain the performance image that the division had cultivated with a new focus on street performance. It involved transforming the upcoming redesigned Tempest (which was set to revert to a conventional front-engine, front transmission, rear-wheel drive configuration) into a "Super Tempest" with the larger 389 in³ (6.5 L) Pontiac V8 engine from the full-sized Pontiac Catalina and Bonneville in place of the standard 326 in³ (5.3 L) Tempest V8. By promoting the big-engine Tempest as a special high-performance model, they could appeal to the speed-minded youth market (which had also been recognized by Ford Motor Company's Lee Iacocca, who was at that time preparing the Ford Mustang).

The name, which was DeLorean's idea, was inspired by the Ferrari 250 GTO, the highly successful race car. It is an acronym for Gran Turismo Omologato, Italian for homologated for racing in the GT class. The name drew protest from purists, who considered it close to sacrilege.


The GTO was technically a violation of GM policy limiting the A-body intermediate line to a maximum engine displacement of 330 in³ (5.4 L). Since the GTO was an option package and not standard equipment, it could be considered to fall into a loophole in the policy. Pontiac General Manager Elliot "Pete" Estes approved the new model, although sales manager Frank Bridge, who did not believe it would find a market, insisted on limiting initial production to no more than 5,000 cars. Had the model been a failure, Estes likely would have been reprimanded. As it turned out, it was a great success.

Second generation
1968
GM redesigned its A-body line for 1968, with more curvaceous, "bustleback" fastback styling. The previous 115 inch (292 cm) wheelbase was shortened to 112 inches (284 cm) for all two-door models. Overall length was reduced 5.9 inches (150 mm) and height dropped half an inch (12 mm), but overall weight was up about 75 pounds (34 kg). Pontiac abandoned the familiar stacked headlights for hidden headlights behind the split grille (actually a US$52.66 option, but seen on many GTOs). The signature hood scoop was replaced by dual scoops on either side of a prominent hood bulge extending from the protruding nose.

A unique feature was the body-color Endura front bumper. It was designed to absorb impact without permanent deformation at low speeds. Pontiac touted this feature heavily in advertising, showing hammering at the bumper to no discernable effect. Though a rare option, a GTO could be ordered with "Endura Delete", in which case the Endura bumper would be replaced by a chrome front bumper and grille setup from the Pontiac LeMans. This model year further emphasized the curvacious "coke bottle" styling, as viewed from the side.

Powertrain options remained substantially the same as in 1967, but the standard GTO engine rose to 350 hp (261 kW) @ 5,000 rpm. At mid-year, a new Ram Air package became available with freer-breathing cylinder heads, round port exhaust and the 744 cam and 3.90:1 rear differential. Horsepower rating was not changed, although actual output was likely somewhat higher, especially with open exhausts. Another carry-over from 1967 was the 4-piston caliper disc brake option. While most 1968 models had drum brakes all around, this rare option provided greater stopping power and could be found on other GM A-Body vehicles of the same period. 1968 was also the last year the GTOs offered separate vent, or "wing", windows—and the only year for crank-operated vent windows.

Another feature was concealed windshield wipers, hidden below the rear edge of the hood. They presented a cleaner appearance and were another Pontiac first for the industry. Another popular option, actually introduced during the 1967 model year, was a hood-mounted tachometer, located in front of the windshield and lighted for visibility at night. An in-dash tachometer was also available, but the hood tachometer became something of a status symbol.

Redline bias-ply tires continued as standard equipment on the 1968 GTO, though they could be replaced by whitewall tires at no extra cost. A new option was radial tires for improved ride and handling. However, very few were delivered with the radial tires because of manufacturing problems encountered by supplier B.F. Goodrich. The radial tire option was discontinued after 1968. Pontiac did not offer radial tires as a factory option on the GTO again until the 1974 model.

Hot Rod tested a four-speed standard GTO and obtained a quarter mile reading of 14.7 seconds at 97 mph (156 km/h) in pure stock form. Motor Trend clocked a four-speed Ram Air with 4.33 rear differential at 14.45 seconds @ 98.2 mph (158.0 km/h) and a standard GTO with Turbo-Hydramatic and 3.23 gears at 15.93 seconds @ 88.3 mph (142.1 km/h). Testers were split about handling, with Hot Rod calling it "the best-balanced car [Pontiac] ever built," but Car Life chiding its excessive nose heaviness, understeer, and inadequate damping.

Now facing serious competition both within GM and from Ford, Dodge, and Plymouth—particularly the low-cost Plymouth Road Runner—the GTO won Motor Trend's Car of the Year award, and sales remained strong at 87,684 (which was the second-best sales year for the GTO).

1969
The 1969 model did not have the vent windows, had a slight grille and taillight revision, moved the ignition key from the dashboard to the steering column, and the gauge faces changed from steel blue to black. In addition, the rear quarter-panel mounted side marker lamps changed from a red lens shaped like the Pontiac "V" crest to one shaped like the broad GTO badge.

The previous economy engine and standard 350 hp 400 in³ V8 remained, but the 360 hp engine was dropped in favor of a pair of new Ram Air engines. The 400 in³ Ram Air III was rated at 366 hp (273 kW) @ 5,100 rpm, while the top option was the 370 hp (276 kW) Ram Air IV, which featured special header-like high-flow exhaust manifolds, high-flow cylinder heads, a specific high-rise aluminum intake manifold, larger Rochester QuadraJet four-barrel carburetor, high-lift/long-duration camshaft, forged steel crankshaft plus various internal components capable of withstanding higher engine speeds and power output. Unlike the big-block Chevy and Hemi motors, the Ram Air IV utilized hydraulic lifters. As a result, it did not overheat in traffic, nor did it foul spark plugs, which set it apart from the large-displacement performance engines seen in other muscle cars.

By this time, the gross power ratings of both Ram Air engines were highly suspect, bearing less relationship to developed horsepower and more to an internal GM policy limiting all cars except the Corvette to no more than one advertised horsepower per ten pounds of curb weight. The higher-revving Ram Air IV's advertised power peak was actually listed at 5,000 rpm—100 rpm lower than the less-powerful Ram Air III. 1969 was also the year that the Ram Air V was introduced. It was a special 400 block with newly designed high compression tunnel port heads and a special high rise intake manifold. A GTO so equipped could go 0-60 mph in 5.2 seconds, and the quarter-mile time was 11.5 seconds at 123 mph (198 km/h).

The significant event of 1969 was the launch of a new model called 'The Judge'. The Judge name came from a comedy routine, "Here Comes the Judge", used repeatedly on the "Rowan & Martin's Laugh-In TV" show. Advertisements used slogans like "All rise for The Judge" and "The Judge can be bought." As originally conceived, the Judge was to be a low-cost GTO, stripped of some gimmicks to make it competitive with the Plymouth Road Runner. During its development, however, it was decided to make it the ultimate in street performance and image. The resulting package ended up being US$337.02 more expensive than a standard GTO, and included the Ram Air III engine, styled wheels, Hurst shifter (with a unique T-shaped handle), wider tires, various decals, and a rear spoiler. Pontiac claimed that the spoiler had some functional effect at higher speeds, producing a small but measurable down force, but it was of little value at legal speeds except for style. The Judge was initially offered only in "Carousel Red," but late in the model year a variety of other colors became available.

The GTO was surpassed in sales both by the Chevrolet Chevelle SS396 and the Road Runner, but 72,287 were sold during the 1969 model year, with 6,833 of them being The Judge.

1970
The Tempest line received another facelift for the 1970 model year. Hidden headlights were deleted in favor of four exposed round headlamps outboard of narrower grille openings. The nose retained the protruding vertical prow theme, although it was less prominent. While the standard Tempest and LeMans had chrome grilles, the GTO retained the Endura urethane cover around the headlamps and grille.

The suspension was upgraded with the addition of a rear anti-roll bar, essentially the same bar as used on the Oldsmobile 442 and Buick Gran Sport. The front anti-roll bar was slightly stiffer. The result was a useful reduction in body lean in turns and a modest reduction of understeer.

Another handling-related improvement was optional variable-ratio power steering. Rather than a fixed ratio of 17.5:1, requiring four turns lock-to-lock, the new system varied its ratio from 14.6:1 to 18.9:1, needing 3.5 turns lock-to-lock. Turning diameter was reduced from 40.9 feet (12.5 m) to 37.4 feet (11.4 m).

The base engine was unchanged for 1970, but the low-compression economy engine was deleted and the Ram Air III and Ram Air IV remained available, although the latter was now a special-order option.

A new option was Pontiac's 455 engine, available now that GM had rescinded its earlier ban on intermediates with engines larger than 400. The 455, a long-stroke engine taken from the full-size Pontiac Bonneville line, was only moderately stronger than the base 400 and actually less powerful than the Ram Air III. The 455 was rated at 360 hp (268 kW) @ 4,300 rpm. Its advantage was torque: 500 ft-lbf (677 N-m) @ 2,700 rpm. A functional Ram Air scoop was available, but even so equipped, a stock 455 was less powerful than the Ram Air III. Car and Driver tested a heavily optioned 455, with a four-speed transmission and 3.31 axle and recorded a quarter mile time of 15.0 seconds with a trap speed of 96.5 mph (155.3 km/h). Car Life's Turbo-Hydramatic 455, with a 3.35 rear differential, clocked 14.76 seconds at 95.94 mph (154.40 km/h), with identical 6.6 second 0-60 mph acceleration. Both were about 3 mph (5 km/h) slower than a Ram Air III 400 four-speed, although considerably less temperamental: the Ram Air engine idled roughly and was difficult to drive at low speeds. The smaller displacement engine recorded less than 9 miles per gallon of gasoline (26.1 L/100 km), compared to 10 to 11 miles per gallon (23.5 to 21.4 L/100 km) for the 455.

A new and short-lived option for 1970 was the Vacuum Operated Exhaust (VOE), which was cable activated via an underdash lever marked "EXHAUST." The VOE was designed to reduce exhaust backpressure to increase horsepower and performance, but it also substantially increased exhaust noise. The VOE option was offered from November 1969 to January 1970. Pontiac management was ordered to cancel the VOE option by GM's upper management following a TV commercial for the GTO that aired during Super Bowl IV on CBS January 11, 1970. In that commercial, entitled "The Humbler," which was broadcast only that one time, a young man pulled up in a new GTO to a drive-in restaurant with dramatic music and exhaust noise in the background, pulling the "EXHAUST" button to activate the VOE and then left the drive-in to do some street racing. That particular commercial was also cancelled by order of GM management.

The Judge remained available as a separate model. The Judge came standard with the Ram Air III, while the Ram Air IV was optional. Though the 455 in³ was available as an option on the standard GTO throughout the entire model year, the 455 was not offered on The Judge until late in the year. "Orbit Orange" became the new standard color for the '70 Judge, but any GTO color was available on The Judge. Striping was relocated to the upper wheelwell brows.
An Orbit Orange 1970 GTO Judge with the 455 engine and Turbo Hydra-Matic transmission was one of the featured cars in the movie "Two-Lane Blacktop", which depicted a cross-country race between the new GTO and a 1955 Chevrolet Bel Air.

The new styling did little to help declining sales, which were now being hit by sagging buyer interest in all musclecars and by the punitive surcharges levied by automobile insurance companies, which sometimes resulted in insurance payments higher than car payments for some drivers. Sales were down to 40,149, of which 3,797 were The Judge. The GTO remained the third best-selling intermediate musclecar, outsold by the Chevrolet Chevelle SS 396/454 and Plymouth Road Runner.

1971
The 1971 GTO had another modest facelift, this time with wire-mesh grilles, horizontal bumper bars on either side of the grille opening, more closely spaced headlamps, and a new hood with the dual scoops relocated to the leading edge, not far above the grille. Overall length grew slightly to 203.3 inches (516 cm).

A new corporate edict, aimed at preparing GM for no-lead gasoline, forced a cross-the-board reduction in compression ratios. The Ram Air engines did not return for 1971. The standard GTO engine was still the 400 in³ V8, but now with 8.2:1 compression. Power was rated at 300 hp (223 kW) @ 4,800 rpm and torque at 400 ft-lbf (542 N-m) @ 3,600 rpm. An engine option was the 455 in³ V8 with four-barrel carburetor, 8.4 to 1 compression ratio and 325 hp (242 kW), only available with the automatic transmission. The top GTO engine for 1971 was the new 455 HO with 8.4 compression, rated at 335 hp @ 4,800 rpm and 480 ft-lbf (650 N-m) @ 3,600 rpm.

Motor Trend tested a 1971 GTO with the 455, four-speed transmission, and 3.90 axle, and obtained a 0-60 mph time of 6.1 seconds and a quarter mile acceleration of 13.4 seconds at 102 mph (164 km/h).
The Judge returned for a final year, now with the 455 HO as standard equipment. Only 374 were sold before The Judge was discontinued in February 1971, including 17 convertibles—today the rarest of all GTOs.
Only 10,532 GTOs were sold were sold in 1971.

1972
In 1972, the GTO reverted from a separate model line to a US$353.88 option package for the LeMans and LeMans Sport coupes. On the base LeMans line, the GTO package could be had with either the low-priced pillared coupe or hardtop coupe. Both models came standard with cloth and vinyl or all-vinyl bench seats and rubber floor mats on the pillared coupe and carpeting on the hardtop, creating a lower-priced GTO. The LeMans Sport, offered only as a hardtop coupe, came with Strato bucket seats upholstered in vinyl, along with carpeting on floor and lower door panels, vinyl door-pull straps, custom pedal trim and cushioned steering wheel, much like GTOs of previous years. Other optional equipment was similar to 1971 and earlier models. Planned for 1972 as a GTO option was the ducktail rear spoiler from the Pontiac Firebird, but after a few cars were built with that option, it was cancelled. Rally II and honeycomb wheels were optional on all GTOs, with the honeycombs now featuring red Pontiac arrowhead emblems on the center caps, while the Rally IIs continued with the same caps as before, with the letters "PMD" (for Pontiac Motor Division).

Horsepower, now rated in SAE net terms, was down further, to 250 hp (186 kW) @ 4,400 rpm and 325 ft-lbf (440 N-m) @ 3,200 rpm torque for the base 400 engine. The optional 455 had the same rated horsepower (although at a peak of 3,600 rpm), but substantially more torque. Most of the drop was attributable to the new rating system (which now reflected an engine in as-installed condition with mufflers, accessories, and standard intake). The engines were relatively little changed from 1971.

5:18 AM | 0 comments | Read More

Mini Cooper S, 1968

Mini Cooper S, 1968

 

The Mini is a small car that was produced by the British Motor Corporation (BMC) and its successors from 1959 to 2000. The most popular British-made car, it has since been replaced by the New MINI which was launched in 2001. The original is considered an icon of the 1960s, and its space-saving front-wheel-drive layout influenced a generation of car-makers. In the international poll for the award of the world's most influential car of the twentieth century the Mini came second after the Ford Model T.

The revolutionary and distinctive two-door car was designed for BMC by Sir Alec Issigonis (1906–88). It was manufactured at the Longbridge and Cowley plants in the United Kingdom, and later in Australia, Belgium, Chile, Italy, Portugal, South Africa, Spain, Uruguay, Venezuela and Yugoslavia. The Mini Mk I had three major updates: The Mk II, the Clubman, and the Mk III, within which were a series of variations including an estate car, a pickup truck, a van, and the Mini Moke — a jeep-like buggy. The Mini Cooper and Cooper "S" were sportier versions that were successful as rally cars — winning the Monte Carlo Rally three times.

Design and development
Designed as project ADO15 (Austin Drawing Office project number 15), the Mini came about because of a fuel crisis. In 1956 as a result of the Suez Crisis, which reduced oil supplies, the United Kingdom saw the re-introduction of petrol rationing. Sales of large cars slumped, and there was a boom in the market for so called bubble cars, which were mainly German in origin. Leonard Lord, the somewhat autocratic head of BMC, decreed that something had to be done and quickly. He laid down some basic design requirements: the car should be contained within a box that measured 10 × 4 × 4 feet (3 × 1.2 × 1.2 m); and the passenger accommodation should occupy six feet (1.8 m) of the 10 foot (3 m) length; and the engine, for reasons of cost, should be an existing unit. Issigonis, who had been working for Alvis, had been recruited back to BMC in 1955 and, with his skills in designing small cars, was a natural for the task. The team that designed the Mini was remarkably small; as well as Issigonis, there was Jack Daniels, who had worked with him on the Morris Minor, Chris Kingham, who had been with him at Alvis, two engineering students and four draughtsmen. Together, by October 1957 they had designed and built the original prototype, which was affectionately named 'The Orange Box' because of its colour.

The ADO15 used a conventional BMC A-Series four-cylinder water-cooled engine, but departed from tradition by having it mounted transversely, placing the engine oil lubricated, four-speed transmission in the sump, and by employing front-wheel drive. Almost all small front-wheel-drive cars developed since the 1970s have used a similar configuration. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so it blew air into the natural low pressure area under the front wing. This location saved precious vehicle length, but had the disadvantage of feeding the radiator with air that had been heated by passing over the engine.

The suspension system, designed by Alex Moulton at Moulton Developments Limited, used compact rubber cones instead of conventional springs — this led to a rather raw and bumpy ride, but this rigidity, together with the wheels being pushed out to the corners of the car, gave the car its famous go kart-like handling. It was initially planned to use an interconnected fluid system, similar to the one which Issigonis and Moulton were working on in the mid-1950s at Alvis, but the short development time of the car meant this would not be ready in time for the launch. The system intended for the Mini was further developed to become the hydrolastic system and was first used on the Austin 1100 (launched in 1962). Ten-inch wheels were specified, so new tyres needed to be developed — with the initial contract going to Dunlop.

The car was designed with sliding windows in the doors, thus allowing for storage pockets to be fitted in the space where a winding window mechanism would have been. Issigonis is said to have sized the resulting storage bins to take a bottle of his favourite Gordon's Gin. The boot lid was designed with the hinges at the bottom so that the car could be driven with it open to increase luggage space. On early cars the number plate was hinged so it dropped down to remain visible when the boot lid was open.

To keep manual labour costs low, the car was designed with quirky welded seams that are visible on the outside of the car running down the A and C pillars and between the body and the floor pan. To further simplify construction, the car had external door and boot hinges.
 

The Mini Cooper and Cooper S – 1961–2000
Issigonis' friend John Cooper, owner of the Cooper Car Company, designer and builder of Formula 1 and rally cars, saw the potential of the Mini. Issigonis was initially reluctant to see the Mini in the role of a performance car - but after John Cooper appealed to BMC management, the two men collaborated to create the Mini Cooper. The Austin Mini Cooper and Morris Mini Cooper debuted in 1961.

The original 848 cc engine from the Morris Mini-Minor was increased to 997 cc, boosting power from 34 bhp to 55 bhp (25 to 41 kW). The car featured a racing-tuned engine, double SU carburettors, close-ratio gearbox and front disc brakes, uncommon at the time in a small car. One thousand units of this iteration were commissioned by management, intended for and designed to meet the homologation rules of Group 2 rally racing. The 997 cc engine was replaced by a shorter stroke 998 cc unit in 1964.

A more powerful Mini Cooper, dubbed the "S", was developed in tandem and released in 1963. Featuring a 1071 cc engine and larger servo-assisted disc brakes, 4,030 Cooper S cars were produced and sold until the model was updated in August 1964. Cooper also produced two models specifically for circuit racing, rated at 970 cc and a 1275 cc, both of which were also offered to the public. The smaller-engine model was not well received, and only 963 were built until the model was discontinued in 1965. The 1275 cc Cooper S models were discontinued in 1971.

The Mini Cooper S earned acclaim with Monte Carlo Rally victories in 1964, 1965, and 1967. Minis were initially placed first, second and third in the 1966 rally as well, but were disqualified after a controversial decision by the French judges. The disqualification related to the use of a variable resistance headlamp dimming circuit in place of a dual-filament lamp. It should be noted that the Citroën DS that was eventually awarded first place had illegal white headlamps but escaped disqualification. The driver of the Citroën, Pauli Toivonen, was reluctant to accept the trophy and vowed that he would never race for Citroën again. BMC probably received more publicity from the disqualification than they would have gained from a victory - but had the Mini not been disqualified, it would have been the only car in history to be placed amongst the Monte Carlo winners for six consecutive years.

In 1971 the Mini Cooper design was licensed in Italy by Innocenti and in 1973 to Spain by Authi (Automoviles de Turismo Hispano-Ingleses), which began to produce the Innocenti Mini Cooper 1300 and the Authi Mini Cooper 1300, respectively.

A new Mini Cooper named the RSP (Rover Special Products) was briefly relaunched in 1990 to 1991, with slightly lower performance than the 1960s Cooper. It proved so popular that the new Cooper-marked Mini went into full production in late 1991. From 1992 Coopers were fitted with a fuel-injected version of the 1275 cc engine, and in 1997 a multi-point fuel injected engine was introduced, along with a front-mounted radiator and various safety improvements.

5:19 PM | 0 comments | Read More

Dodge Charger

Dodge Charger, 1968

There have been a number of vehicles bearing the Charger nameplate, but the name has generally denoted a performance model in the Dodge range. The 1966 to 1974 Chargers were the high performance B-body models. The 1975 to 1978 Chargers were based on the Chrysler Cordoba.

1968

It was clear after the sales drop of the 1967 Charger that a restyle was in order. Dodge was going to restyle their entire B-body lineup for 1968 and decided that it was time to separate the Coronet and Charger models even further. What designer Richard Sias came up with was a double-diamond design that would later be referred to as "coke-bottle" styling. From the side profile the curves around the front fenders and rear quarter panels look almost like a Coke bottle. On the roof a "flying buttress" was added to give the rear window area a look similar to that of the 1966 Pontiac GTO. The Charger retained its full-length hidden headlight grille, but the fully rotating electric headlights had been replaced by a simple vacuum operated cover, similar to the Camaro RS. The full length taillights were gone as well. Instead, dual Corvette-inspired taillights were added. Dual scallops were added to the doors and hood to help accent the new swoopy lines. Inside, the interior shared almost nothing with its first generation brothers. The four bucket seats were gone, the console remained the same as the '67. The tachometer was now optional instead of standard, the trunk and grille medallions were gone, the carpeting in the trunk area was gone, replaced by a vinyl mat, the rear seats did not fold forward and the space-age looking electroluminescent gauges disappeared in favor of a more conventional looking design.

In order to further boost the Charger's muscle car image, a new high-performance package was added, the R/T. This stood for "Road and Track" and would be the high performance badge that would establish Dodge's performance image. Only the high performance cars were allowed to use the R/T badge. The R/T came standard with the previous year's 440 "Magnum". The Slant Six was added to the option list in 1968, but it proved to be a very poor seller. Most people wanted a V8 in their Charger. The rest of the engine lineup (318-2, 383-2, 383-4, 426-8) remained unchanged.

In 1968 Chrysler Corporation unveiled a new ad campaign featuring a Bee with an engine on its back. These cars were called the "Scat Pack". The Coronet R/T, Super Bee, Dart GTS and Charger R/T received bumble-bee stripes (two thin stripes framing two thick stripes). The stripes were standard on the R/Ts and came in red, white or black. They also could be deleted at no cost. These changes and the new Charger bodystyle proved to be very popular with the public and helped to sell 96,100 Chargers, including over 17,000 Charger R/Ts.

A famous Charger was the four-speed, triple-black 1968 Charger R/T used in the movie Bullitt. The chase scene between Steve McQueen's fastback Mustang GT and the hitmen's Charger R/T is popularly regarded as one of the greatest car chase scenes ever filmed.

5:05 AM | 0 comments | Read More

VW 411

VW 411, 1968

On September 19, 2008 forty years have passed since Volkswagen presented the VW 411, at that time the company's largest and most powerful model yet, to some 200 journalists in Wolfsburg. The journalists had earlier put the VW 411 through its paces on the new Volkswagen proving ground in Ehra-Lessien, testing the vehicle's equipment and performance. Volkswagen built 367,728 units until production ceased in July 1974, and 416 of these are currently registered as old-timers (as of September 2008).

The ads claimed there had never been a VW like this before. And they were quite right. This was the very first model with a unibody, a four-door option, more space than any other Volkswagen and a longer wheelbase than the Volkswagen Beetle. A newly-designed, powerful, 68 bhp air-cooled 1.6 liter boxer engine mounted in the rear of the Volkswagen 411 was robust enough even for long journeys at a maximum speed of 145 km/h. The innovative sporty chassis with MacPherson strut front suspension and rear suspension with double joint axles also used in the Porsche 911 made sure the car held the road well.

The history of what was known as the Type 4 began in 1962 as development project EA 142. The economics of series production, which began in February 1967, were based on the sale of 822,500 vehicles over a four year period with daily production of 1,000 units. The price of the VW 411 ranged from 7,770 to 9,285 DM.

Compared to the Volkswagen 1500/1600 launched in 1961, the VW 411 was noticeably larger and better equipped. Volkswagen aimed to establish the new vehicle in the upper midsize segment which was beyond the reach of the Beetle and the Type 3, and to expand the market position in the long term by broadening the model range. For this reason, the publicity concentrated on technical innovations and the high level of comfort as well as highlighting typical Volkswagen characteristics such as quality, economic efficiency and service.

In the run-up to the market launch on October 5, 1968, dealers, the press and customers responded positively to the Volkswagen 411. Once the car had come to market, problems with the clutch on the first models delivered and an increasingly negative press curbed sales prospects. The most common complaints from customers related to engine and driving noise, the engine's limited output and what was perceived as an unaesthetic front end. Since over 80% of VW 411 buyers were already Volkswagen customers, the vehicle failed to win new customer groups. As a result of these marketing problems, which could not be remedied by sales incentives either, Volkswagen sporadically lowered production to 75 vehicles per day.

The company introduced an improved version, the VW 411 E, for the 1970 model year. Electronic fuel injection boosted engine output to 80 bhp and the front end, which had given the model the nickname of "Nasenbär" (coati), received a facelift. The VW 411 E Variant, provided even more space for luggage, and this estate version was soon selling twice as well as the hatchback saloon. Type 4 exports to the USA began in 1971, and the car sold better than expected there, soon accounting for roughly 40% of total sales. A further new and improved model called the VW 412 followed in 1972. Production of the Type 4 at the Wolfsburg plant continued until 1973, when the production line was relocated to Salzgitter, and production at Volkswagen of South Africa commenced in 1969.

Even though the VW 411/412 did not break any sales records, the model nevertheless has an important role to play in Volkswagen's automobile history as the last large series model with air cooling and a rear-mounted engine. A 1966 prototype is on display at the Automuseum Wolfsburg.

4:07 AM | 0 comments | Read More

Opel GT

Opel GT 1968

"Only Flying is More Exciting" - this slogan has become a classic in advertising history, and even an everyday saying in German-speaking countries. It belonged to a car which has itself long since become a classic - the Opel GT. Its career got off to a flying start in 1965 when, to everyone's surprise, Opel presented an aerodynamic "Experimental Concept" at the IAA in Frankfurt - a car which did not fit into the usual world of central European high volume automobile production. In view of the sensational design, it was no surprise to see the production version on the road three years later. But what few people knew was that Opel had set a precedent: for the first time in Europe, a vehicle went into production that had initially debuted as a concept car.

The 1968 Opel Coupé could not deny a certain similarity to the legendary 1968 American Corvette, nor did it want to. It followed a new design style called the "Coke Bottle Shape", which also outstanding the Stingray. "Besides having a fantastic look, the Opel sports car was primarily designed to impress with sophisticated aerodynamics," explains Erhard Schnell, GT designer at the time. A sleek front end with retractable headlamps that rotate on the longitudinal axis, broad fender, tapered flanks in the door area, then bulky rear fenders which flow into the rear with sharp separating edges and round lamps - these were the Opel GT's key design characteristics.

"Safety belts are standard, please buckle up" - this was the Opel advertisement that promised GT occupants outstanding acceleration. And the driving performance the sporty 90 hp two-seater offered was truly top class in the late 1960s. Its 1.9-liter engine accelerated the GT from zero to 100 km/h in 10.8 seconds, and on to a top speed of 185 km/h. Almost 40 years ago, this was really fast. As a top model in the upper mid-class segment at that time, the Opel Rekord 1.9 had a top speed of 160 km/h, for example. The 200 km/h threshold was like the sound barrier, and had just been crossed by the muscle cars of that generation, such as the Mercedes 280 SE 3.5 with a 200 hp V8 engine. A Porsche 912 - which was commonly considered to be a car in the shape of the first 911, with four cylinders and 90hp, just like the Opel GT - also had a top speed of 185 km/h, but took 12.5 seconds from zero to 100 km/h.

The 1968 GT's sporty handling matched its performance figures thanks to a chassis with front twin A-arm axle and rear center-joint rigid axle with bolted springs, longitudinal control arm and lateral track bar.

Did you know?
= from 1968 to 1973, exactly 103,464 units of the GT were produced? The GT is a permanent collectors highlight, and a well-maintained model can fetch a fortune.
= 85 percent of the entire GT production run was exported, and 70,222 units (around 70 percent) went to the USA alone?
= the GT's body in white was created by French specialists Chausson (Reims), while Brisonneau & Lotz in Creil, north of Paris, took care of lacquering, electrics and interior equipment? The final car assembly took place in Bochum, where the body was 'married' to the powertrain and chassis. It was also the production center for the Kadett, upon which the GT was based.
= space for the 1.9-liter engine, which was also used in the Rekord, was so small that the hood had to be power domed and the cylinder-head cover skewed in the front section? The "Power dome" was not just for show!
= the Aero GT concept with removable targa roof was presented in 1969 at the IAA? One of the two prototypes can be found today in Opel's classic collection.
= the company founder's grandson, Georg von Opel, reached 188 km/h in mid-1971 at Hockenheim in a converted Opel GT with electric propulsion? The following year, a team of motoring journalists and race car drivers set 20 world records at the Opel Test Center in Dudenhofen in the "Diesel World Record GT 1972".
= many reasons led to the end of production in August 1973? These included demands from the USA - the most important export market - to fit bulky safety bumpers, which did not match the style of the car, and the fact that Brisonneau & Lotz was bought by Renault, signaling the end of the contractual relationship with Opel.
= Robert A. Lutz, "car guy", GM Vice Chairman, Global Product Development, was a sort of godfather to both Opel GTs? In 1968, in his position as Manager at Opel, he played a decisive role in speeding up the decision on series production, and he also gave the green light to the new General Motors roadster troop - Solstice, Sky and GT.

7:50 AM | 0 comments | Read More